Products
产品名称: Pre-terminated Cable
上市日期:2017-12-05
  • Overview
  • 产品规格
  • 详细参数

DYS has been providing high-quality pre-terminated cables for indoor and/or outdoor applications, with fanout number ranging from 12 to 144. Available connector types include MPO, SC, LC, FC, LSH, and MU, available fanout kits include steel-tube type, round type, box type, barrel type, etc., and available fanout types include bare fiber, 0.9mm, 1.2mm, 2.0mm, 3.0mm, etc. The fanout length can be up to 10 meters, and the fanout tolerance can be as small as 0.5cm.

 

Our indoor/outdoor non-armored Pre-Terminated Fiber Optic Cable Assemblies are great choices for multiple applications inside or outside. For those jobs outside, consider our outdoor non-armored Pre-Terminated Fiber Optic Cable Assemblies for aerial or burial in duct applications. If you’re facing the most extreme conditions, check out our outdoor armored direct burial/aerial and ADSS self-supporting aerial Pre-Terminated Fiber Optic Cable Assemblies. They will provide outstanding service and durability in all kinds of conditions.

 

All of our pre-terminated cable products are tailor-made to customers’ specific requirements. We can fulfill any kinds of customers’ demands on products’ specs including connector type, fanout type, fanout length/tolerance, cable structure, etc., for a wide range of applications including FTTC, FTTB, FTTH, FTTA, data center, industrial, robotic, health-care fields, etc.

 


APPLICATIONS

Connected with trunk cables on one end, equipment port on the other end.

Connected with transfer modules on one end, equipment port on the other end.

 


FEATURES

100% pre-terminated and tested in factory to ensure transfer performance

Rapid configuration and networking, reduce installation time

Supports 40G and 100G network applications

Jacket material: LSZH, OFNR, OFNP available

Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available

 



PRODUCT PHOTOS



Pre-terminated CablePre-terminated CablePre-terminated CablePre-terminated Cable
Pre-terminated CablePre-terminated CablePre-terminated CablePre-terminated Cable





MUAPC-SCAPCSC-SCFC-STLC-LCAPC

PRODUCT PARAMETERS



Performance Level

Standard

Elite

Connector

Mode

Endface

IL(max) (dB)

RL(min) (dB)

IL(max) (dB)

RL(min) (dB)

LC/SC/FC/ST

SM

APC

0.30

60

0.20

65

UPC

0.20

50

0.10

50

MM

PC

0.20

30

0.10

30

 

 

Mechanical Properties

Item

Criteria

Conformance

△IL After 50 Matings

MPO/MTP

≤0.3dB

GR-1435

△IL After 500 Matings

LC/SC/FC/ST

≤0.2dB

IEC 61300-2-2

Min Bend Radius (Dynamic)

20*OD (Cable Diameter)

Min Bend Radius (Static )

15*OD (Cable Diameter)

 

Environment Conditions

Item

Criteria

Conformance

Operation Temperature

-40~60°C

IEC 61753-1

Storage Temperature

-45~85°C

 


File preview
Hot Products / Hot Products More
2018 - 09 - 19
APPLICATIONFTTHOutdoor AreasHarsh Environment FEATURESSingle fiber, SC-based connectorBird proof and rodent resistantIP67 water and dust protection Low profile in-line receptacle availableNo installation tools requiredIn-line connection availableCable diameter Range: 2.0mm, 3.0mm, 4.8mm to 7mm  PRODUCT PHOTOSH optic with indoor cable H optic with round drop cableFemale H Optic ...
2018 - 04 - 10
DYS MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environment, reducing network in stallation or reconfiguration time and cost. MTP/MPO are used to interconnect cassettes, panels, or fan outs, it offered in fiber typs in standard 8 , 12 ,24 ,or 48 cores versions using a compact and rugged m...
2017 - 12 - 05
Drop cables are located on the subscriber end to connect the terminal of a distribution cable to a subscriber’s premises. They are typicality small diameter, low fiber count cables with limited unsupported span lengths, which can be installed aerially, underground or buried. As it is used in outdoor, drop cable shall have a minimum pull strength of 1335 Newtons according to the industry standard. ...
LINK:
ABOUT US
One-Stop Solution Service;
Competitiveness of Price, Quality and Delivery time will be 
ensured for the main products made by our own factory.

GET IN TOUCH
ADDRESS:

ShenZhen Factory/Headquarters:
2/F,7Building,TangTou Industrial Zone 3rd,shiyan Town,BaoAn District,Shenzhen,P.R.China


TEL:86-0755-29650336           FAX:86-0755-29510505
SKYPE:beyondhuang123          MAIL:dys@dysfiber.com

MianYang Factory:
3rd,Wu Tong Villages,WuDu Town,JiangYou City,SiChuan Province,P.R.China


TEL:86-0816-3883255         FAX:86-0816-3883255

PHONE:


SITE MAP
Copyright © 2018  SHENZHEN DYS FIBER OPTIC TECHNOLOGY CO.,LTD 
犀牛云提供企业云服务